Шаблон:Convert/док

За претварање валуте у америчким доларама погледајте страницу Шаблон:To USD.

За копирање овог шаблона у другом викију погледајте страницу Шаблон:Convert/Transwiki guide.

За детаљнију и техничку информацију погледајте страницу Помоћ:Претварање.

Шаблон {{convert}} рачуна мерну јединицу (број × мерна јединица) у истом мерењу с другом мерном јединицом, и онда формулише резултате. Комплетан списак симбола мерних јединица у шаблону је овде.

На пример:

{{convert|2|km|mi}} → 2 km (1,2 mi) (километри претварани у миље)

{{convert|7|mi|km}} → 7 mi (11 km) (миље претваране у километре)

Бројеви могу бити заокругљивани, а мерне јединице могу бити скраћене у симболе:

{{convert|2|km|mi|2|abbr=on}} → 2 km (1,24 mi)

{{convert|7|mi|km|2|abbr=on}} → 7 mi (11,27 km)

Опсези се могу унети помоћу |до|... или |-|...:

{{convert|2|до|5|km|mi}} → 2 до

{{convert|2|-|5|km|mi}} → 2—5 km (1,2—3,1 mi)

Комбиновани пример:

{{convert|2|-|5|km|mi|2|abbr=on}} → 2—5 km (1,24—3,11 mi)

{{convert|2|и|5|km|mi|sigfig=3|abbr=off}} → 2 и

Units to convert

See also: the summary at Complete list of units for {{Convert}} and the complete list at Module:Convert/documentation/conversion data

Enter units to convert from into:

• {{convert|1|lb|kg}} → 1 lb (0,45 kg)

SI units generally accept prefixes, like "m" for milli (10⁻³), and "M" for mega (10⁶)

For "per" units, use "/" (slash): kg/ha (see § 'per' units: kg/ha and § Currency per unit: $/km)

For three-unit units, etc., see Категорија:Convert-like templates

Unit name or symbol (abbreviation): 1 pound or 1 lb?

By default, the first quantity shows the unit name, the second shows the symbol (or abbreviation):

• {{convert|1|lb|kg}} → 1 lb (0,45 kg)

Using |abbr=in shows the symbol for first (left-hand side) unit, and the name instead of the symbol for the second unit:

• {{convert|1|lb|kg|abbr=in}} → 1 lb (0,45 kilograms)

To abbreviate both or neither:

• {{convert|1|lb|kg|abbr=on}} → 1 lb (0,45 kg)
• {{convert|1|lb|kg|abbr=off}} → 1 pound (0,45 kilograms)

Convenience: {{cvt}} has |abbr=on by default

Template {{cvt}} is the same as {{convert}}, except that it has |abbr=on as the default behavior. In {{cvt}}, all other options are available. So:

{{cvt|1|lb|kg}} → 1 lb (0,45 kg)

is equivalent to:

{{convert|1|lb|kg|abbr=on}} → 1 lb (0,45 kg)

Adjective: a 10-mile distance

Use |adj=on to produce the adjectival (hyphenated) form:

• A {{convert|10|mi|km|adj=on}} distance → A 10 mi (16 km) distance.

Default behavior, for comparison:

• {{convert|10|mi|km}} to go → 10 mi (16 km) to go.

|adj=on does not produce hyphens with unit symbols, as per :

• A {{convert|9|in|cm|adj=on|abbr=on}} nail → A 9 in (23 cm) nail.

Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?

See Help:Convert#Rounding § Notes for a more mathematical description of the rounding options

By definition, 100 ft equals 30,48 m. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

Default rounding

By {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant digits, whichever is more precise. An exception to this is rounding temperatures (see below).

Examples of rounding
Input	Displays as	Note
{{convert|123|ft|m|-1}}	123 ft (40 m)
{{convert|123|ft|m}}	123 ft (37 m)	same output as with 0 (below)
{{convert|123|ft|m|0}}	123 ft (37 m)
{{convert|123|ft|m|1}}	123 ft (37,5 m)
{{convert|123|ft|m|2}}	123 ft (37,49 m)	The more-exact value is 37.4904 m or so, which gets converted to 37 m if this parameter is not specified at all.
{{convert|500|ft|m|-1}}	500 ft (150 m)
{{convert|500|ft|m}}	500 ft (150 m)	same output as with −1 (above), because the conversion factor is between 0.2 and 2 (hence, it should produce same double-zero precision (−2) as in the input value), but the conversion must produce two significant digits at a minimum (hence, a higher single-zero precision (−1) is used)
{{convert|500|ft|m|0}}	500 ft (152 m)
{{convert|500|ft|m|1}}	500 ft (152,4 m)
{{convert|500|ft|m|2}}	500 ft (152,40 m)	exact value is 152.4 m
{{convert|500|ft|cm|-3}}	500 ft (15.000 cm)
{{convert|500|ft|cm}}	500 ft (15.000 cm)	same output as with −3 (above), because the conversion factor is between 20 and 200 (hence, it should decrease input value's double-zero precision (−2) by 2), but the conversion must produce two significant digits at a minimum (hence, a higher triple-zero precision (−3) is used)
{{convert|500|ft|cm|0}}	500 ft (15.240 cm)

Convert supports four types of rounding:

Round to a given precision: use a precision number

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of ¹⁄₁₀ to the power of this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.

Round to a given number of significant figures: |sigfig=

To specify the output number to be with n significant figures use |sigfig=<number>:

• {{convert|1200|ft|m|sigfig=4}} → 1.200 ft (365,8 m)
• {{convert|1200|ft|m|sigfig=3}} → 1.200 ft (366 m)
• {{convert|1200|ft|m|sigfig=2}} → 1.200 ft (370 m)
• {{convert|1200|ft|m|sigfig=1}} → 1.200 ft (400 m)

Default behavior, for comparison:

• {{convert|1200|ft|m}} → 1.200 ft (370 m)

Setting |sigfig= to a value less than 1 is meaningless:

• {{convert|1200|ft|m|sigfig=0}} → 1.200 ft (370 m) N

Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

• {{convert|10|m|ft}} → 10 m (33 ft)
• {{convert|10|m|ft|round=5}} → 10 m (35 ft)

Similar: using |round=25 rounds the outcome to a multiple of 25.

• {{convert|10|m|ft}} → 10 m (33 ft)
• {{convert|10|m|ft|round=25}} → 10 m (25 ft)

Default behavior, for comparison:

• {{convert|10|m|ft|sigfig=4}} → 10 m (32,81 ft)

In a range, one can round each value individually to the default. Use |round=each:

• {{convert|10 x 200 x 3000|m|ft}} → 10 m × 200 m × 3.000 m (33 ft × 656 ft × 9.843 ft)
• {{convert|10 x 200 x 3000|m|ft|round=each}} → 10 m × 200 m × 3.000 m (33 ft × 660 ft × 9.800 ft)

Round to a multiple of a given fraction: 2 ³⁄₁₆ inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in ¹⁄₃).

• {{convert|5.56|cm|in|frac=16}} → 556 cm (218 ⁷⁄₈ in)
• {{convert|8|cm|in|frac=4}} → 8 cm (3 ¹⁄₄ in)

The fraction is reduced when possible:

• {{convert|8|cm|in|frac=100}} → 8 cm (3 ³⁄₂₀ in)

Default behavior uses decimal notation:

• {{convert|5.56|cm|in}} → 556 cm (219 in)

Rounding temperatures: °C, °F and K

In temperatures, the conversion will be rounded either to the precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

1. {{convert|10,000|C|F K}} → 10,000 °C (50,000 °F; 283,150 K)
2. {{convert|10,000.1|C|F K}} → 10,0001 °C (50,0002 °F; 283,1501 K)
3. {{convert|-272|C|F K}} → −272 °C (−457,60 °F; 1,15 K)
4. {{convert|-272|C}} → −272 °C (−457,60 °F)
5. {{convert|100|C|F K}} → 100 °C (212 °F; 373 K)
6. {{convert|0|C|F K}} → 0 °C (32 °F; 273 K)

The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 01 degree Celsius change is a 1,8 degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow. Result (1) seems off until you set the significant figures yourself with |sigfig=:

{{convert|10000|C|sigfig=5}} → 10.000 °C (18.032 °F)

or you set the precision positionally, relative to the decimal point (zero being at the decimal point):

{{convert|10000|C|0}} → 10.000 °C (18.032 °F)

The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.

Rounding input

There is limited support for rounding the displayed input number. The rounding takes place after conversion, so the output is based on the full-precision input. This is useful when the input is produced by {{#expr:}} or otherwise available to a higher precision than is usefully displayed, and it's desirable to avoid double-rounding.

To round the input to a specified number of digits after the decimal point, use one of the parameters:

• |adj=ri0
• |adj=ri1
• |adj=ri2
• |adj=ri3

Note that there is no |adj=ri-1N or similar for rounding above the decimal place. Neither is there support for significant figures, multiples of 5, or any other output-rounding feature.

The default precision is computed based on the input, so an explicit output precision must usually be supplied:

• {{convert|4.14159|mi|km|adj=ri0}} → 414.159 mi (666.524 km) N (precisions are mismatched)
• {{convert|4.14159|mi|km|0|adj=ri0}} → 414.159 mi (666.524 km) Д

In this case, if the input were rounded before conversion, a different result would be obtained:

• {{convert|{{#expr:4.14159 round 0}}|mi|km|0}} → 4 mi (6 km) N (rounds intermediate calculation, giving a different result)

Into multiple units: 10 °C (50 °F; 283 K)

Separate the multiple output units by a space:

• {{convert|10|C|F K}} → 10 °C (50 °F; 283 K)
• {{convert|5|km|mi nmi}} → 5 km (3,1 mi; 2,7 nmi)

If the output unit names contain spaces, use + as the separator.

See also:

• For multiple-unit options like 1 ft 5 in, see § In input and § In output.

Ranges of values

За a conversion of a difference погледајте страницу § Units of difference.

A range converts two values and separates them by your choice of words and punctuation.

A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:

Range separators in {{convert}}
Separator	Convert	Result	Notes
-	{{convert|3|-|6|ft}}	3—6 ft (0,91—1,83 m)	Input can be hyphen (-) or en dash (–), output uses en dash
– – (en dash)	{{convert|3|–|6|ft}}	3 –
and	{{convert|3|and|6|ft}}	3 and 6 ft (0,91 and 1,83 m)
and(-)	{{convert|3|and(-)|6|ft}}	3 and 6 ft (0,91—1,83 m)	|abbr=on abbreviates the first unit
and(-)|abbr=on	{{convert|3|and(-)|6|ft|abbr=on}}	3 and 6 ft (0,91—1,83 m)
or	{{convert|3|or|6|ft}}	3 or 6 ft (0,91 or 1,83 m)
to	{{convert|3|to|6|ft}}	3 to 6 ft (0,91 to 1,83 m)
to(-)	{{convert|3|to(-)|6|ft}}	3 to 6 ft (0,91—1,83 m)	|abbr=on abbreviates the first unit
to(-)|abbr=on	{{convert|3|to(-)|6|ft|abbr=on}}	3 to 6 ft (0,91—1,83 m)
to about	{{convert|3|to about|6|ft}}	3 to about 6 ft (0,91 to about 1,83 m)
+/-	{{convert|3|+/-|6|ft}}	3 ± 6 ft (0,91 ± 1,83 m)
± ±	{{convert|3|±|6|ft}}	3 ± 6 ft (0,91 ± 1,83 m)
+	{{convert|3|+|6|ft}}	3 + 6 ft (0,91 + 1,83 m)
,	{{convert|3|,|6|ft}}	3, 6 ft (0,91, 1,83 m)
, and	{{convert|3|, and|6|ft}}	3, and 6 ft (0,91, and 1,83 m)
, or	{{convert|3|, or|6|ft}}	3, or 6 ft (0,91, or 1,83 m)
by	{{convert|3|by|6|ft}}	3 by 6 ft (0,91 by 1,83 m)
x	{{convert|3|x|6|ft}}	3 ft × 6 ft (0,91 m × 1,83 m)	|abbr=on abbreviates and repeats the first unit
× ×	{{convert|3|×|6|ft}}	3 ft × 6 ft (0,91 m × 1,83 m)
x|abbr=on	{{convert|3|x|6|ft|abbr=on}}	3 ft × 6 ft (0,91 m × 1,83 m)
xx	|xx| is deprecated. Use |x| instead
*	|*| is deprecated. Use |x| instead

Multiple dimensions: 6 m × 12 m (20 ft × 39 ft)

Use by:

• {{convert|6|by|12|ft|m}} → 6 by 12 ft (1,8 by 3,7 m)

Use ×, multiplication sign, or x, letter:

• {{convert|6|x|12|m|ft}} → 6 m × 12 m (20 ft × 39 ft)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km²):

• {{convert|6|x|12|m|ft|abbr=on}} → 6 m × 12 m (20 ft × 39 ft)

Lists of values: 20, 40, or 60 miles

{{convert|20|,|40|, or|60|mi}} → 20, 40, or 60 mi (32, 64, or 97 km)

About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

• {{convert|1|ft|3|in|x|3|ft|5|in|mm}} → 1 ft 3 in () N

Default behavior, for comparison:

• {{convert|1|ft|3|in|mm}} → 1 ft 3 in (380 mm)

However, converting metric units into feet and inches with |order=flip can produce the desired output:

• {{convert|380|x|1040|mm|ftin|order=flip}} → 1 ft 3 in × 3 ft 5 in (380 mm × 1.040 mm)

Words

Spelling of unit name: international metre or US meter?

Default spelling of units is in the en (generic) locale. To show en-US spelling, use |sp=us:

{{convert|1|m|ft}} → 1 m (3,3 ft)—default

{{convert|1|m|ft|sp=us}} → 1 m (3,3 ft)

Spell out numbers: ten miles

To write a number in words, use |spell=in:

• {{convert|10|mi|m|spell=in}} → ten mi (16.000 m)

To spell out both in and out values, use |spell=on:

• {{convert|10|mi|m|spell=on}} → ten miles (sixteen thousand metres)

To make first letter a capital, use |spell=In, |spell=On

• {{convert|10|mi|m|spell=In}} → Ten mi (16.000 m)
• {{convert|10|mi|m|spell=On}} → Ten miles (sixteen thousand metres)

Remember that the spelling of the units (ft, m) is independently set by |abbr=. To the extreme:

• {{convert|10|mi|m|spell=on|abbr=off|sp=us}} → ten miles (sixteen thousand meters)

Inserted before units: 4 planted acres

• {{convert|4|acre||adj=pre|planted}} → 4 planted acres (1,6 ha)

disp=preunit is similar, but has no separator after the specified text, and can have different text for the output value:

• {{convert|4|acre||disp=preunit|planted }} → 4 planted acres (1,6 planted ha)
• {{convert|4|acre||disp=preunit|planted |reforested-}} → 4 planted acres (1,6 reforested-ha)

After adjective unit: A 10 ft-long corridor

Note that two units (in this case, ft and m) are required. Use with just one unit will generate an error message.

{{convert|10|ft|m|adj=mid|-long}} → 10 ft-long (3,0 m)

Plurals: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

• {{convert|1|metre}} → 1 m (3 ft 3 in)
• {{convert|2|metre}} → 2 m (6 ft 7 in)
• {{convert|2|metre|abbr=on}} → 2 m (6 ft 7 in)

Exception

Entering the unit spelled |foot| forces singular output "foot", whatever the number is.

• {{convert|100|foot|abbr=off}} → 100 foot (30 metres)

Fractions: one-eighth of an imperial pint

The convert template also supports spelling out fractions.

• {{convert|3+1/2|oz|g|spell=in}} → three and a half oz (99 g)

Any additional words needed for the fraction can also be added at the end of the template.

• {{convert|1/8|imppt|ml|spell=in|adj=pre|of an}} → one-eighth of an imp pt (71 ml)

Wrapping and line breaking

See Help:Convert § Wrapping and line breaking

Spelling out "thousands", "millions", etc.

Most unit codes accept a prefix of e3 (thousand) or e6 (million) or e9 (billion).

• {{convert|100|e6mi|e6km}} → 100×10^⁶ mi (160×10^⁶ km)
• {{convert|120|e6acre}} → 120×10^⁶ acres (490.000 km²)
• {{convert|120|e6acre|e3km2}} → 120×10^⁶ acres (490×10^³ km²)

To display both input and output in scientific notation, use |abbr=on

• {{convert|100|e6mi|e6km|abbr=on}} → 100×10^⁶ mi (160×10^⁶ km)

To spell out "thousands", "millions", etc., |abbr=unit abbreviates the unit; |abbr=off displays both full unit names.

• {{convert|100|e6mi|e6km|abbr=unit}} → 100 million mi (160 million km)
• {{convert|100|e6mi|e6km|abbr=off}} → 100 million miles (160 million kilometres)

Numbers

Using an SI prefix: gigametre (Gm), or micrometre (μm)

Metric prefixes
Text Symbol Factor yotta Y 1024 zetta Z 1021 exa E 1018 peta P 1015 tera T 1012 giga G 109 mega M 106 kilo k 103 hecto h 102 deca da 101 (none) (none)  1 deci d 10−1 centi c 10−2 milli m 10−3 micro μ 10−6 nano n 10−9 pico p 10−12 femto f 10−15 atto a 10−18 zepto z 10−21 yocto y 10−24

Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigametre. These are plain multiplication factors.

To illustrate, these are trivial calculations (from metre to metre), showing the multiplication factor:

• 12 Gm (1,2×10¹⁰ m)
• 12 µm (1,2×10⁻⁵ m)

The prefix can be added before the SI unit (here: unit m for metre):

• {{convert|12|Gm|mi|abbr=on}} → 12 Gm (7.500.000 mi)
• Mm: 12 Mm (7.500 mi)
• km: 12 km (39.000 ft)
• mm: 12 mm (0,47 in)
• μm: 12 µm (0,012 mm)
• um: 12 µm (0,012 mm) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

• {{convert|12000|mi|Mm|abbr=on}} → 12.000 mi (19 Mm)
• {{convert|12|in|μm|abbr=on}} → 12 in (300.000 µm)

As an exception, the non-SI unit "inch" can have the "μ" prefix too:

• {{convert|12|μm|μin|abbr=on}} → 12 µm (470 μin)

За више информација погледајте: Help:Convert units § SI prefixes

Engineering notation: 7 × 10⁶ m

In the unit: e6m

Engineering notation can be entered as a "prefix" to the unit:

• {{convert|70|e6m}} → 70×10^⁶ m (230.000.000 ft)

The same is possible for the output unit:

• {{convert|23,000,000|ft|e6m}} →

Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:

• e3 (thousand),
• e6 (million),
• e9 (billion),
• e12 (trillion),
• e15 (quadrillion).

Scientific notation: 1.23 × 10⁻¹⁴

In scientific notation, a number is written like 6986123000000000000♠1,23×10⁻¹⁴. The plain number has exactly one digit before the decimal point.

With {{convert}}, the input can be in e-notation such as 12.3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

• {{convert|12.3e-15|atm|atm|abbr=on}} → 123×10⁻¹⁵ atm (1,23×10⁻¹³ atm)
• {{convert|0.00000005|atm|atm|abbr=on}} → 000.000.005 atm (5,0 atm)

Input with fractions: 1 ¹⁄₂ in (38,1 mm)

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

• {{convert|1/2|in|mm|1}} → ¹⁄₂ in (12,7 mm)
• {{convert|1⁄2|in|mm|1}} → ¹⁄₂ in (12,7 mm)

With positive mixed numbers (a positive integer and a fraction), use a + sign

• {{convert|2+1⁄2|in|mm|1}} → 2 ¹⁄₂ in (63,5 mm)

With negative mixed numbers, use a hyphen - and repeat it:

• {{convert|-2-1⁄2|in|mm|1}} → −2 ¹⁄₂ in (−63,5 mm)

Note that the following cases are not interpreted as mixed numbers:

• {{convert|2-1⁄2|in|mm|1}} → 2—¹⁄₂ in (50,8—12,7 mm). This is interpreted as a range from 2 inches to 1⁄2 inch.
• {{convert|-2+1⁄2|in|mm|1}} → N This is neither a mixed number nor a range, and mathematical expressions requiring calculations are not allowed here.
• {{convert|2+½|in|mm|1}} → N Fractions consisting of a single Unicode character are not allowed either.

Horizontal fraction bar: 1/2 inch

Using a double slash (//) provides a horizontal fraction bar for the original (input) unit:

• {{convert|1//2|in|mm|1}} → 1/2 in (12,7 mm)
• {{convert|6+3//8|in|mm|1}} → 6 3/8 in (161,9 mm)

Using a negative value for |frac= provides a horizontal fraction bar for the converted (output) unit:

• {{convert|12.7|mm|frac=-2}} → 127 mm (5 in)
• {{convert|161.9|mm|frac=-8}} → 1.619 mm (63 3/4 in)

Thousands separator: 1,000 mi or 1000 mi

In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:

• {{convert|1234567|m|ft}} → 1.234.567 m (4.050.417 ft)
• {{convert|1,234,567|m|ft}} →

Set |comma=off to remove the separator from the output:

• {{convert|1234567|m|ft|comma=off}} → 1234567 m (4050417 ft)

Use |comma=gaps to use digit grouping by gap (thin space) as a thousands separator:

• {{convert|1234567|m|ft|comma=gaps}} → 1234567 m (4050417 ft)

Default behavior, for comparison:

• {{convert|1234567|m|ft}} → 1.234.567 m (4.050.417 ft)

Setting |comma=5 will only add the separator when the number of digits is 5 or more:

• {{convert|1234|m|ft|comma=5}} → 1234 m (4049 ft)
• {{convert|1234567|m|ft|comma=5}} → 1.234.567 m (4.050.417 ft)

Default behavior, for comparison:

• {{convert|1234|m|ft}} → 1.234 m (4.049 ft)

Output manipulation

Brackets and separators: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, or, br, br(), x|…:

• {{convert|10|m|ft|disp=sqbr}} → 10 m [33 ft]
• {{convert|10|m|ft|disp=comma}} → 10 m, 33 ft
• {{convert|10|m|ft|disp=or}} → 10 m or 33 ft

Default behavior, for comparison:

• {{convert|10|m|ft}} → 10 m (33 ft)

Setting |disp=br will force a new line (<br/>)

• {{convert|10|m|ft|disp=br}} → 10 m
  33 ft

Also |disp=br() will force a new line, and keep the brackets (useful in tables):

• {{convert|10|m|ft|disp=br()}} → 10 m
  (33 ft)

Setting |disp=x|… allows any text as separator:

• {{convert|10|m|ft|disp=x|_MyText_}} → 10 m_MyText_33 ft (To display spaces, use  )

Flipping (reordering) the two measurements: 1.609,3 metres (1 mile)

Setting |order=flip will flip (swap) the two measurements:

• {{convert|1|mi|m|order=flip}} → 1.609,3 metres (1 mile)

Default behavior, for comparison:

• {{convert|1|mi|m}} → 1 mile (1.609,3 metres)

When converting to multiple units, the effect is:

• {{convert|10|km|mi nmi|order=flip}} → 6,2137 miles; 5,3996 nautical miles (10 kilometres)
• {{convert|10|km|nmi mi|order=flip}} → 5,3996 nautical miles; 6,2137 miles (10 kilometres)

Fixed ordering of output units: 212 °F (100 °C; 373 K)

Setting |order=out shows the output-units as ordered; the input unit is skipped:

• {{convert|100|C|F C K|abbr=on|order=out}} → 212 °F (100 °C; 373 K)
• {{convert|200|PS|kW hp|0|abbr=on|order=out}} → 147 kW (197 КС)

See also: § Displaying parts of the output.

Displaying parts of the result: 2 (1,5)

It is possible to display only parts of the conversion result:

Convert	Output	Returns
{{convert|2|cuyd|m3}}	2 cu yd (1,5 m3)	Regular output (for comparison)
{{convert|2|cuyd|m3|abbr=values}}	2 (1,5)	Input and output numbers
{{convert|2|cuyd|m3|disp=unit}}	cu yd	Input unit
{{convert|2|cuyd|m3|disp=unit|adj=on}}	cu yd	Input unit, adjective (hyphenated)
{{convert|2|cuyd|cuyd|disp=out}}	2,0 cu yd	Input (workaround. Note repetition of unit in input)
{{convert|2|cuyd|m3|abbr=~}}	2 cu yd [cu yd] (1,5 m3)	Input: both name and symbol
{{convert|2|cuyd|m3|disp=unit2}}	m3	Output unit (symbol)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}}	cubic metres	Output unit (name)
{{convert|2|cuyd|m3|disp=number}}	1,5	Output value
{{convert|2|cuyd|m3|disp=out}}	1,5 m3	Output value and unit name
{{convert|2|cuyd|m3|disp=out|abbr=off}}	1,5 cubic metres	Output value and unit symbol

Display both input name and symbol: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

• {{convert|2|kPa|psi|abbr=~}} → 2 kPa [kPa] (0,29 psi)
• A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure → A 2 kPa [kPa] (0,29 psi) pressure

Table options

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

Enforced line break

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

|disp=br	|disp=br()
100 km 62 mi	100 km (62 mi)

Table columns

Using {convert} in a table cell, with |disp=table splits the result over two (or more) columns. By default units are not included in the table, however, they can be added using the |abbr= parameter. Multiple-unit outputs, like ftin, always output their units to the table.

{{convert|10|m|ft|disp=table}} →

style="text-align:right;"|10 |style="text-align:right;"|33

|disp=tablecen does the same, and also centers the text:

{{convert|20|m|ft|disp=tablecen}} →

style="text-align:center;"|20 |style="text-align:center;"|66

The units are added as a column header:

	kilograms	pounds	stone and pounds
|disp=table	10	22	1 st 8 lb
|disp=table and |abbr=on	20 kg	44 lb	3 st 2 lb
|disp=table and |abbr=off	30 kilograms	66 pounds	4 stone 10 pounds
|disp=tablecen	40	88	6 st 4 lb
|disp=<other> (default)	50 kg (110 lb; 7 st 12 lb)

Sorting

Use |sortable=on to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:

{{convert|10|m|ft|sortable=on}} → <span data-sort-value="7001100000000000000♠"></span>10 metres (33 ft)

showing: 7001100000000000000♠10 m (33 ft).

Use both |disp=table and |sortable=on together to produce table columns (pipe symbols) for each value in sortable columns:

	m	m	ft
A	7001157500000000000♠15,75 m	15 3⁄4	52
B	7001155000000000000♠15,5 m	155	509
C	7001160000000000000♠16 m	160	520
D	7001160000000000000♠16 m	16	52

The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.

Units

The conversion factors and physical constants are sourced here.

All units

Units are case-sensitive: use kW, not KW or kw

The table below lists units supported by {{convert}}. More complete lists are linked for each dimension. For a complete list of all dimensions, see full list of units.

{{Convert}} uses unit-codes, which are similar to, but not necessarily exactly the same as, the usual written abbreviation for a given unit. These unit-codes are displayed in column 3 of the following tables. These are accepted as input by {{convert}} as the second and third unnamed parameters:

• {{convert|100|kg|lb}} → 100 kg (220 lb)
• {{convert|100|lb|kg}} → 100 lb (45 kg)

The unit-codes should be treated as case-sensitive:

• {{convert|100|Mm|mm}} → 100 Mm (1,0×10¹¹ mm)

The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the pipe separator). Typical combination output units are listed below in column 7.

• {{convert|55|nmi|km mi}} → 55 nmi (102 km; 63 mi)
• {{convert|1|oz|ozt g gr}} → 1 oz (0,91 ozt; 28 g; 440 gr)

Some units have alternative unit-codes. These are shown in brackets in column 3, e.g. °F (F). Either may be entered for Fahrenheit (but not a lower-case f).

Abridged list of supported units
Explanation
system	unit	unit- code	symbol or abbrev.	notes	sample default conversion	combination output units
the system(s) to which the unit belongs	units listed by name	unit-code to use in template	symbols shown in output	other notes about the units	sample of the default conversion for the unit	output codes for multiple conversions
AREA (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	km2	km2	km2	US spelling: square kilometer	10 km2 (3,9 sq mi)	km2 sqmi
	m2	m2	m2	US spelling: square meter	10 m2 (110 sq ft)	m2 sqft
	cm2	cm2	cm2	US spelling: square centimeter	10 cm2 (1,6 sq in)	cm2 sqin
	mm2	mm2	mm2	US spelling: square millimeter	10 mm2 (0,016 sq in)	mm2 sqin
non-SI metric	ha	ha	ha		10 ha (25 acres)
Imperial & US customary	sq mi	sqmi	sq mi		10 sq mi (26 km2)	sqmi km2
	acre	acre	(none)		10 acres (4,0 ha)
	sq yd	sqyd	sq yd		10 sq yd (8,4 m2)
	sq ft	sqft (sqfoot)	sq ft	long code "sqfoot" outputs square foot (and never feet)	10 sq ft (0,93 m2)	sqft m2 (sqfoot m2)
	sq in	sqin	sq in		10 sq in (65 cm2)	sqin cm2
Other	sq nmi	sqnmi	sq nmi		10 sq nmi (34 km2; 13 sq mi)
	dunam	dunam	(none)	For alternative spellings and definitions see the full list	10 dunams (0,010 km2; 0,0039 sq mi)
	tsubo	tsubo	(none)		10 tsubo (33 m2)
DENSITY (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
Metric	kg/m3	kg/m3	kg/m3		10 kg/m3 (17 lb/cu yd)	kg/m3 lb/ft3 (kg/m3 lb/cuft) kg/m3 lb/yd3 (kg/m3 lb/cuyd)
	g/m3	g/m3	g/m3		10 g/m3 (0,017 lb/cu yd)	g/m3 kg/m3 g/m3 lb/ft3 (g/cm3 lb/cuft) g/m3 lb/yd3 (g/cm3 lb/cuyd)
Imperial & US customary	lb/cu ft	lb/ft3	lb/cu ft		10 lb/cu ft (0,16 g/cm3)	lb/ft3 kg/m3 (lb/cu ft g/m3) lb/ft3 g/m3 (lb/cu ft g/m3)
	lb/cu yd	lb/yd3	lb/cu yd		10 lb/cu yd (5,9 kg/m3)	lb/yd3 kg/m3 (lb/cuyd kg/m3) lb/yd3 g/m3 (lb/cuyd g/m3)
ENERGY (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	GJ	GJ	GJ		10 GJ (2.800 kWh)
	MJ	MJ	MJ		10 MJ (2,8 kWh)
	kJ	kJ	kJ		10 kJ (2.400 cal)
	hJ	hJ	hJ		10 hJ (240 cal)
	daJ	daJ	daJ		10 daJ (24 cal)
	J	J	J		10 J (2,4 cal)
	dJ	dJ	dJ		10 dJ (0,24 cal)
	cJ	cJ	cJ		10 cJ (0,024 cal)
	mJ	mJ	mJ		10 mJ (0,0024 cal)
	µJ	µJ (uJ)	µJ		10 µJ (2,4×10−6 cal)
	nJ	nJ	nJ		10 nJ (2,4×10−9 cal)
cgs	Merg	Merg	Merg		10 Merg (1,0 J)
	kerg	kerg	kerg		10 kerg (1,0 mJ)
	erg	erg	(none)		10 erg (1,0 µJ)
Watt-hour multiples	TWh	TWh	TWh		10 TWh (36 PJ)
		TW.h	TW⋅h
	GWh	GWh	GWh		10 GWh (36 TJ)
		GW.h	GW⋅h
	MWh	MWh	MWh		10 MWh (36 GJ)
		MW.h	MW⋅h
	kWh	kWh	kWh		10 kWh (36 MJ)
		kW.h	kW⋅h
	Wh	Wh	Wh		10 Wh (36 kJ)
		W.h	W⋅h
Electron- volt multiples
	GeV	GeV	GeV		10 GeV (1,6 nJ)
	MeV	MeV	MeV		10 MeV (1,6 pJ)
	keV	keV	keV		10 keV (1,6 fJ)
	eV	eV	eV		10 eV (1,6 aJ)
	meV	meV	meV		10 meV (1,6 zJ)
Calorie multiples	Cal	Cal	Cal	The thermo-chemical calorie is the default definition. For others, see the full list.	10 Cal (42 kJ)
	Mcal	Mcal	Mcal		10 Mcal (42 MJ)
	kcal	kcal	kcal		10 kcal (42 kJ)
	cal	cal	cal		10 cal (42 J)
	mcal	mcal	mcal		10 mcal (42 mJ)
pound/ ounce-foot/ inch-hour-minute-second	ft⋅pdl	ftpdl	ft⋅pdl		10 ft⋅pdl (0,42 J)
	ft⋅lbf	ftlbf	ft⋅lbf		10 ft⋅lbf (14 J)
		ftlb-f	ft⋅lbf
	in⋅lbf	inlbf	in⋅lbf		10 in⋅lbf (1.100 mJ)
		inlb-f	in⋅lbf
	in⋅ozf	inozf	in⋅ozf		10 in⋅ozf (71 mJ)
		inoz-f	in⋅ozf
	hp⋅h	hph	hp⋅h		10 hp⋅h (7,5 kWh)
British thermal unit	Btu	Btu	Btu	The International Steam Table British thermal unit is used. For others, see the full list.	10 Btu (11 kJ)
		BTU	BTU
TNT-based units	gigatonne of TNT	GtTNT	(none)		10 gigatonnes of TNT (42 EJ)
	gigaton of TNT	GtonTNT	(none)
	megatonne of TNT	MtTNT	(none)		10 megatonnes of TNT (42 PJ)
	Mt	MtonTNT	Mt
	kilotonne of TNT	ktTNT	(none)		10 kilotonnes of TNT (42 TJ)
	kt	ktonTNT	kt
	tonne of TNT	tTNT	(none)		10 tonnes of TNT (42 GJ)
	ton of TNT	tonTNT	(none)
Other
	Eh	Eh	Eh		10 Eh (270 eV)
	Ry	Ry	Ry		10 Ry (140 eV)
	toe	toe	toe		10 toe (420 GJ)
	BOE	BOE	BOE		10 BOE (61 GJ)
	cubic foot of natural gas	cuftnaturalgas (cufootnaturalgas)		Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural.	10 cubic feet of natural gas (11 MJ)
	l⋅atm	latm	l⋅atm		10 l⋅atm (1.000 J)
		Latm	L⋅atm
	imp gal⋅atm	impgalatm	imp gal⋅atm		10 imp gal⋅atm (4.600 J)
	US gal⋅atm	USgalatm (usgalatm)	US gal⋅atm		10 US gal⋅atm (3.800 J)
		U.S.galatm (usgalatm)	U.S. gal⋅atm
FORCE (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	GN	GN	GN	Allows triple output units. See: full list.	10 GN (2,2×109 lbf)	GN LT-f GN LTf GN ST-f GN STf
	MN	MN	MN	Allows triple output units. See: full list.	10 MN (2.200.000 lbf)	MN LT-f MN LTf MN ST-f MN STf
	kN	kN	kN	Allows triple output units. See: full list.	10 kN (2.200 lbf)	kN LT-f kN LTf kN ST-f kN STf
	N	N	N		10 N (2,2 lbf)	N lb-f N lbf N oz-f N ozf
	mN	mN	mN		10 mN (0,036 ozf)	mN oz-f mN ozf mN gr-f mN grf
	µN	µN (uN)	µN		10 µN (2,2×10−6 lbf)	µN gr-f µN grf
	nN	nN	nN		10 nN (1,6×10−5 grf)	nN gr-f nN grf
cgs	Mdyn	Mdyn	Mdyn		10 Mdyn (22 lbf)
	kdyn	kdyn	kdyn		10 kdyn (0,36 ozf)
	dyn	dyn (dyne)	dyn		10 dyn (0,16 grf)
	mdyn	mdyn	mdyn		10 mdyn (0,00016 grf)
Metric gravitational units	tf	t-f	tf		10 tf (98 kN; 9,8 LTf; 11 STf)
		tf	tf
	kgf	kg-f	kgf		10 kgf (98 N; 22 lbf)
		kgf	kgf
	gf	g-f	gf		10 gf (98 mN; 0,35 ozf)
		gf	gf
	mgf	mg-f	mgf		10 mgf (98 µN; 0,15 grf)
		mgf	mgf
Avoirdupois-based units	pdl	pdl	pdl		10 pdl (1,4 N)
	LTf	LT-f	LTf		10 LTf (100 kN)	LT-f ST-f
		LTf	long ton-force			LTf STf
	STf	ST-f	STf		10 STf (89 kN)	ST-f LT-f
		STf	short ton-force			STf LTf
	lbf	lb-f	lbf		10 lbf (44 N)
		lbf	lbf
	grf	gr-f	grf		10 grf (6.400 µN)
		grf	grf
LENGTH (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	Mm	Mm	Mm	US spelling: megameter	10 Mm (6.200 mi)
	km	km	km	US spelling: kilometer	10 km (6,2 mi)	km mi
	m	m	m	US spelling: meter	10 m (33 ft)	m ft m ftin
	cm	cm	cm	US spelling: centimeter	10 cm (3,9 in)	cm in
	mm	mm	mm	US spelling: millimeter	10 mm (0,39 in)	mm in
	µm	µm (um)	µm	US spelling: micrometer	10 µm (3,3×10−5 ft)
	nm	nm	nm	US spelling: nanometer	10 nm (3,9×10−7 in)
non-SI metric	Å	Å (angstrom)	Å		10 Å (3,9×10−8 in)
Imperial & US customary	mi	mi	mi		10 mi (16 km)	mi km
	furlong	furlong	(none)		10 furlongs (6.600 ft; 2.000 m)
	chain	chain	(none)		10 chains (660 ft; 200 m)
	rd	rd	rd	For other names of this unit see the full list.	10 rd (160 ft; 50 m)
	fathom	fathom	(none)	fathom ≡ 6 ft	10 fathoms (60 ft; 18 m)
	yd	yd	yd	assumes the international definition	10 yd (9,1 m)
	ft	ft (foot)	ft	long code "foot" outputs foot (and never feet)	10 ft (3,0 m)	ftin (feet and inches) ft m (foot m)
	in	in	in		10 in (250 mm)	in cm in mm
Other	nmi	nmi	nmi	the international standard nautical mile For other nautical miles see the full list.	10 nmi (19 km; 12 mi)
	pc	pc	pc		10 pc (33 ly)
	ly	ly	ly		10 ly (630.000 AU)
	AU	AU	AU		10 AU (1,5×109 km; 930.000.000 mi)
MASS (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	kg	kg	kg	Allows triple output units. See: full list.	10 kg (22 lb)	kg lb kg st
	g	g	g		10 g (0,35 oz)	g oz
	mg	mg	mg		10 mg (0,15 gr)	mg gr
	µg	µg (ug)	µg		10 µg (3,5×10−7 oz)
non-SI metric	t	t	t	Allows triple output units. See: full list.	10 t (9,8 long tons; 11 short tons)	t LT t ST
	t	MT	t			MT LT MT ST
Avoirdupois	long ton	LT	(none)	2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list.	10 long tons (10 t)	LT t LT MT LT ST
		long ton	long ton
	short ton	ST	(none)	2,000 lb used mostly in the US. Allows triple output units. See: full list.	10 short tons (9,1 t)	ST t ST MT ST LT
		short ton	short ton
	st	st	st	14 lb used mostly in the British Commonwealth except Canada. Allows triple output units. See: full list.	10 st (140 lb; 64 kg)	st kg st lb
	lb	lb	lb	Allows triple output units. See: full list.	10 lb (4,5 kg)	lb kg lb st
	oz	oz	oz		10 oz (280 g)	oz g
	drachm	drachm	(none)		10 drachms (18 g)
	drachm	dram	(none)
	gr	gr	gr	equivalent to the troy grain	10 gr (0,65 g)
Troy	ozt	ozt	ozt		10 ozt (11 oz; 310 g)
other	carat	carat	(none)		10 carats (2,0 g)
SPEED (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	m/s	m/s	m/s	US spelling: meter per second	10 m/s (33 ft/s)	m/s ft/s (m/s foot/s)
non-SI metric	km/h	km/h	km/h	US spelling: kilometer per hour	10 km/h (6,2 mph)	km/h mph
Imperial & US customary	mph	mph	mph		10 mph (16 km/h)	mph km/h mph kn
	ft/s	ft/s (foot/s)	ft/s	long code "foot/s" outputs foot per second (and never feet)	10 ft/s (3,0 m/s)	ft/s m/s
Maritime units	kn	kn (knot)	kn		10 kn (19 km/h; 12 mph)	kn mph
TEMPERATURE (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	K	K	K	Allows triple output units. See: full list.	10 K (−263,1 °C; −441,7 °F)	K °C (K C) K °R (K R) K °F (K F)
	°C	°C (C)	°C		10 °C (50 °F)	°C K (C K) °C °R (C R) °C °F (C F)
Imperial & US customary	°R	°R (R)	°R		10 °R (5,56 K; −449,67 °F; −267,59 °C)	°R K (R K) °R °C (R C) °R °F (R F)
	°F	°F (F)	°F		10 °F (−12 °C)	°F K (F K) °F °C (F C) °F °R (F R)
	Celsius change	C-change		Used for temperature intervals instead of actual temperatures Example:  {{convert|5|C-change|0}} warmer Result: 5 °C (9 °F) warmer
	Fahrenheit change	F-change		Used for temperature intervals instead of actual temperatures Example:  {{convert|10|F-change|0}} colder Result: 10 °F (6 °C) colder
TORQUE (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
Industrial
SI	N⋅m	Nm	N⋅m	Triple combinations are also possible. See the full list.	10 N⋅m (7,4 lbf⋅ft)	Nm kg.m Nm lb.ft
Non-SI metric	kg⋅m	kg.m	kg⋅m		10 kg⋅m (98 N⋅m; 72 lb⋅ft)	kg.m Nm kg.m lb.ft
Imperial & US customary	lb⋅ft	lb.ft	lb⋅ft		10 lb⋅ft (14 N⋅m)	lb.ft Nm lb.ft kg-m
Scientific
SI	N⋅m	N.m	N⋅m	Triple combinations are also possible. See the full list.	10 N⋅m (7,4 lbf⋅ft)	N.m kgf.m N.m lbf.ft
Non-SI metric	kgf⋅m	kgf.m	kgf⋅m		10 kgf⋅m (98 N⋅m; 72 lbf⋅ft)	kgf.m N.m kgf.m lbf.ft
Imperial & US customary	lbf⋅ft	lbf.ft	lbf⋅ft		10 lbf⋅ft (14 N⋅m)	lbf.ft N.m lbf.ft kgf.m
VOLUME (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	m3	m3	m3	US spelling: cubic meter one kilolitre	10 m3 (350 cu ft)
	cm3	cm3	cm3	US spelling: cubic centimeter one millilitre	10 cm3 (0,61 cu in)
		cc	cc
	mm3	mm3	mm3	US spelling: cubic millimeter	10 mm3 (0,00061 cu in)
non-SI metric	kl	kl	kl	US spelling: kiloliter one cubic metre	10 kl (350 cu ft)
		kL	kL
	l	l	l	US spelling: liter one cubic decimetre Allows triple output units. See: full list.	10 l (2,2 imp gal; 2,6 US gal)	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
		L	L			L impgal L impqt L USgal L U.S.gal L USdrygal L U.S.drygal
	cl	cl	cl	US spelling: centiliter	10 cl (3,5 imp fl oz; 3,4 US fl oz)
		cL	cL
	ml	ml	ml	US spelling: milliliter one cubic centimetre	10 ml (0,35 imp fl oz; 0,34 US fl oz)	ml impoz ml USoz ml U.S.oz
		mL	mL			mL impoz mL USoz mL U.S.oz
Imperial & US customary	cu yd	cuyd	cu yd		10 cu yd (7,6 m3)
	cu ft	cuft (cufoot)	cu ft	long code "cufoot" outputs cubic foot (and never feet)	10 cu ft (0,28 m3)
	cu in	cuin	cu in		10 cu in (160 cm3)
Imperial	imp bbl	impbbl	imp bbl	36 imp gal	10 imp bbl (1.600 l; 360 imp gal; 430 US gal)
	imp bsh	impbsh	imp bsh	8 imp gal	10 imp bsh (360 l; 80 imp gal; 83 US dry gal)
		impbu	imp bu
	imp gal	impgal	imp gal	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list.	10 imp gal (45 l; 12 US gal)	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	imp qt	impqt	imp qt	1/4 imp gal or 40 imp fl oz	10 imp qt (11.000 ml; 380 US fl oz)
	imp pt	imppt	imp pt	1/8 imp gal or 20 imp fl oz	10 imp pt (5,7 l)
	imp fl oz	impoz (impfloz)	imp fl oz	1/160 imp gal	10 imp fl oz (280 ml; 9,6 US fl oz)	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	US bbl	USbbl	US bbl	31½ US gal used for liquids except for oil and beer (see the full list)	10 US bbl (1.200 l; 310 US gal; 260 imp gal)
		U.S.bbl	U.S. bbl
	bbl	oilbbl	bbl	42 US gal	10 bbl (1,6 m3)
	US bbl	USbeerbbl (usbeerbbl)	US bbl		10 US bbl (1.200 l; 310 US gal; 260 imp gal)
		U.S.beerbbl (usbeerbbl)	U.S. bbl
	US gal	USgal	US gal	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list.	10 US gal (38 l; 8,3 imp gal)	USgal l USgal L USgal impgal
		U.S.gal	U.S. gal			USgal l USgal L USgal impgal
	US qt	USqt	US qt	1/4 US gal or 32 US fl oz	10 US qt (9.500 ml)
		U.S.qt	U.S. qt
	US pt	USpt	US pt	1/8 US gal or 16 US fl oz	10 US pt (4,7 l; 8,3 imp pt)
		U.S.pt	U.S. pt
	US fl oz	USoz (USfloz)	US fl oz	1/128 US gal	10 US fl oz (300 ml)	USoz ml USoz mL USoz impoz
		U.S.oz (U.S.floz)	U.S. fl oz			U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	US dry bbl	USdrybbl	US dry bbl	105/32 US bsh	10 US dry bbl (1,2 m3)
		U.S.drybbl	U.S. dry bbl
	US bsh	USbsh	US bsh	2150.42 cubic inches by definition	10 US bsh (350 l; 80 US dry gal; 78 imp gal)
		U.S.bsh	U.S. bsh
	US bu	USbu	US bu	2150.42 cubic inches by definition	10 US bu (350 l; 80 US dry gal; 78 imp gal)
		U.S.bu	U.S. bu
	US dry gal	USdrygal	US dry gal	1/8 US bsh Allows triple output units. See: full list.	10 US dry gal (44 l)	USdrygal l USdrygal L USdrygal impgal
		U.S.drygal	U.S. dry gal			U.S.drygal l U.S.drygal L U.S.drygal impgal
	US dry qt	USdryqt	US dry qt	1/32 US bsh	10 US dry qt (11.000 ml)
		U.S.dryqt	U.S. dry qt
	US dry pt	USdrypt	US dry pt	1/32 US bsh	10 US dry pt (5.500 ml)
		U.S.drypt	U.S. dry pt
PRESSURE
	unit	unit- code	abbrev- iation		sample default conversion
	GPa	GPa	GPa		10 GPa (1.500.000 psi)
	MPa	MPa	MPa		10 MPa (1.500 psi)
	kPa	kPa	kPa		10 kPa (1,5 psi)
	hPa	hPa	hPa		10 hPa (0,15 psi)
	Pa	Pa	Pa		10 Pa (0,0015 psi)
	mPa	mPa	mPa		10 mPa (1,5×10−6 psi)
	mbar	mbar	mbar		10 mbar (10 hPa)
		mb	mb
	dbar	dbar	dbar		10 dbar (100 kPa)
	bar	bar	(none)		10 bar (1.000 kPa)
	kBa	kBa	kBa		10 kBa (10 hPa)
	Ba	Ba	Ba		10 Ba (1,0 Pa)
	atm	atm	atm		10 atm (1.000 kPa)
	Torr	Torr	Torr		10 Torr (1,3 kPa)
	mmHg	mmHg	mmHg		10 mmHg (1,3 kPa)
	inHg	inHg	inHg		10 inHg (34 kPa)
	psi	psi	psi		10 psi (69 kPa)
FUEL EFFICIENCY
	unit	unit- code		notes		combinations
	kilometres per litre	km/l (km/L)		Use km/L to get "km/L"		km/l mpgimp km/l mpgus
	litres per 100 kilometres	l/100 km (L/100 km)		Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
	litres per kilometre	l/km (L/km)		Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
	miles per imperial gallon	mpgimp				mpgimp mpgus
	miles per US gallon	mpgus (mpgUS, mpgU.S.)		Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
	imperial gallons per mile	impgal/mi				impgal/mi
	US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)		As above with the us vs US vs U.S.		usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
POWER
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lowercase hp for horsepower, for example)
POPULATION DENSITY
	unit	unit- code		notes		combinations
	inhabitants per square kilometre	PD/sqkm		PD stands for population density, i.e. humans (inhabitants)		PD/sqkm PD/sqmi
	per square kilometre	/sqkm		Used when the word 'inhabitants' would be inappropriate.		/sqkm /sqmi
	inhabitants per hectare	PD/ha				PD/ha PD/acre
	per hectare	/ha				/ha /acre
	inhabitants per square mile	PD/sqmi		PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/sqkm
	per square mile	/sqmi		Used when the word 'inhabitants' would be inappropriate.		/sqmi /sqkm
	inhabitants per acre	PD/acre				PD/acre PD/ha
	per acre	/acre				/acre /ha
COST PER UNIT MASS
	unit	unit- code		notes		combinations
	dollars per pound	$/lb		"$" can mean US$, HK$, etc.		(none)
	dollars per kilogram	$/kg				(none)
	dollars per troy ounce	$/ozt		12 troy ounces in 1 troy pound		(none)

'per' units: kg/ha, miles per gallon

When using a slash (/), a unit like kg/hl is recognized as kilograms per hectare and will be converted in to other mass/area units. A unit in the numerator is not required.

• {{convert|1000|kg/ha}} → 1.000 kg/ha (890 lb/acre)
• {{convert|350|/in2}} → 350/in² (54/cm²)

Population density (inhabitants per square mile) can be converted using

• {{convert|10|PD/sqmi|PD/km2}} → 10/sq mi (3,9/km²)

Vehicular fuel efficiency, commonly expressed in miles per gallon or litres per 100 km can also be converted

• {{convert|26|mpgUS|l/100km mpgimp}} → 26 mpg_‑US (9,0 l/100 km; 31 mpg_‑imp)

Units of difference: Expressing a change or difference in temperature

We have already discussed standard temperature conversions (°C, °F, K), as shown in these two examples:

• {{convert|10|C}} → 10 °C (50 °F) (standard temperature conversion)
• {{convert|10–15|C}} → (standard temperature range conversion)

When expressing a temperature change (e.g., "The temperature increased by 10 °C"), or when comparing temperatures (e.g., "10 to 15 °C warmer"), we cannot use the standard temperature units (|C, |F and |K), which refer to points on the respective scale. Instead, we must use one of the following "units of difference": |C-change, |F-change and |K-change.

Compare the following two examples with the two above:

• {{convert|10|C-change}} → 10 °C (18 °F) increase in temperature
• {{convert|10–15|C-change}} → warmer than normal

To produce multiple units in the output:

• {{convert|10|C-change|F-change K-change}} → 10 °C (18 °F; 10 K) difference

Multiple units: 1 ft 5 in

In input

Base document § Input multiples lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):

• {{convert|1|yd|2|ft|3|in}} → 1 yd 2 ft 3 in (1,60 m)
• {{convert|2|ft|3|in|cm}} → 2 ft 3 in (69 cm)
• {{convert|1|lb|5|oz|g}} → 1 lb 5 oz (600 g)

In output

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at § Output multiples.

• {{convert|2|m|ftin}} → 2 m (6 ft 7 in)
• {{convert|2|m|ft in}} → 2 m (6,6 ft; 79 in), using a space, returns the decimal point

Default behavior, for comparison:

• {{convert|2|m}} → 2 m (6 ft 7 in)

See also:

• {{hands}} a length used to measure horses
• {{Long ton}} a weight in ton, cwt, qr and lb

Currency per unit: $/mi → $/km

Using currency symbols in a $ per unit value, you can convert the per-unit:

• {{convert|10|$/mi|$/km}} → $10/mi ($6,2/km)
• {{convert|1500|$/ozt|$/g}} → $1.500/ozt ($48/g)

You can set the currency in both values using |$=€:

• {{convert|10|$/mi|$/km|$=€}} → €10/mi (€6,2/km)

It is not possible to convert the currency. So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km) N

Using convert inside templates

For usage in template code, like infoboxes, {{Convert}} has these options:

Pre-formatting fraction input

• Module:Convert/helper can read regular input and pre-format it into {{Convert}}-accepted input.

Your template can accept |input=16 7/8 and use {{#invoke:Convert/helper|number|16 7/8}} → 16+7/8

Using a Wikidata property

• Adding the Wikidata property code, like code |input=P2073, to your template code automatically returns the Wikidata property for that article, and convert it. Both number and unit are read.

Note: to return that property value for an other article, use |qid=.

Example for домет (P2073): Note: this example uses |qid=Q1056131 (testing for Cessna 208 Caravan (Q1056131))

• {{convert|input=P2073|qid=Q1056131|ftin|abbr=on}} → 1.500 mi (7.920.000 ft 0 in)
• {{convert|input=P2073|qid=Q1056131|km|abbr=on}} → 1.500 mi (2.400 km)
• {{convert|input=P2073|qid=Q1056131|km|abbr=on|disp=out}} → 2.400 km

For example see template:Infobox Telescope.

Sometimes a property may have more than one value against it in Wikidata. You can use the |qual= parameter to specify which of the values you want to use.

Example for пречник (P2386): Note: this example uses |qid=Q1513315 (testing for South Pole Telescope (Q1513315))

• primary mirror (Q613628): {{convert|input=P2386|qual=Q613628|ft|abbr=on}} → 100 m (330 ft)
• secondary mirror (Q1395645): {{convert|input=P2386|qual=Q1395645|ft|abbr=on}} → 1 m (3,3 ft)

Parameter list

Parameter options for {{convert}}
Parameter	Value	Description	Note
|abbr=in	in	Use symbol for first (left-hand side) unit	Unit display
|abbr=off	off	Use name for all units	Unit display
|abbr=none	none
|abbr=on	on	Use symbol for all units	Unit display
|abbr=out	out	Use symbol for right-hand side unit (default)	Unit display
|abbr=unit	unit	Use symbol for all units when using scientific notation	Unit display
|abbr=values	values	Omit both the input and output units: show only the numbers	Unit display
|abbr=~	~	Shows both unit name and symbol	Unit display
|adj=mid|…	mid	User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter.	Word adding, adjective
|adj=on	on	Unit name is adjective (singular and hyphenated)	Grammar, adjective
|adj=pre|…	pre	User-specified text before input unit. Expects 1 unnamed parameter.	Word adding
|adj=ri0	ri0	Round input with precision 0	Input precision
|adj=ri1	ri1	Round input with precision 1	Input precision
|adj=ri2	ri2	Round input with precision 2	Input precision
|adj=ri3	ri3	Round input with precision 3	Input precision
|comma=5	5	Only use comma for thousands separator if 5 or more digits	Number format
|comma=gaps	gaps	Use gaps (space), not comma, for thousands separator	Number format
|comma=off	off	No thousands separator	Number format
|disp=b	b	Join input and output using " (...)" (default)	Join values
|disp=sqbr	sqbr	Join input and output using " [...]"	Join values
|disp=br	br	Join input and output using "<br/>"	Join values
|disp=comma	comma	Join input and output using ", "	Join values
|disp=or	or	Join input and output using " or "	Join values
|disp=number	number	Display output number only	Parts only
|disp=output number only	output number only
|disp=out	out	Display only output number and name/symbol	Parts only
|disp=output only	output only
|disp=preunit|…[|…]	preunit	Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters.	Word adding
|disp=table	table	Output is suitable for a table cell with align="right"	Table columns
|disp=tablecen	tablecen	Output is suitable for a table cell with align="center"	Table columns
|disp=unit	unit	Display input name/symbol only (not input number, not output)	Parts only
|disp=unit2	unit2	Display output name/symbol only (not input; not output number)	Parts only
|disp=x|…	x	Join input and output using user-specified text	Word adding
|frac=N	N	Show imperial number in fractions, denominator=N	Number format, fraction
|input=P2048	P2048 (e.g.)	Reads and converts Wikidata property	Inside template
|lk=in	in	Link left-hand side unit name or symbol	Unit link
|lk=on	on	Link all unit names or symbols (but not twice for the same unit)	Unit link
|lk=out	out	Link right-hand side unit name or symbol	Unit link
|order=flip	flip	Inverts order of input, output measurements (conversion first)	Order
|order=out	out	Displays output units in the order entered, skipping input unit	Order
|qid=Q1056131	Q1056131 (e.g.)	Reads Wikidata property from Wikidata item	Inside template; testing
|qual=Q613628	Q613628 (e.g.)	Qualify Wikidata property
|round=5	5	Rounds calculation to the nearest multiple of 5	Output precision
|round=25	25	Rounds calculation to the nearest multiple of 25	Output precision
|round=each	each	In a range, each number is rounded by the default rounding	Output precision
|sigfig=N	N	Round output number to N significant figures (N is a positive integer)	Output precision
|sortable=on	on	Adds invisible sort key	Table sort
|sp=us	us	Use U.S. spelling ("meter" instead of default "metre")	Spelling U.S. names
|spell=in	in	Spell input number in words	Spelling numbers
|spell=In	In	Spell input number in words with first letter uppercase	Spelling numbers
|spell=on	on	Spell input and output numbers in words	Spelling numbers
|spell=On	On	Spell input and output numbers in words with first letter uppercase	Spelling numbers
|$=€	€	Replace $-sign with a currency sign, for example in €/hectare	Cost per unit No currency conversion happens
|debug=yes	yes	Debugging only. In a sortable table: show the normally hidden sort key	Table sort
|disp=flip	flip	Deprecated. Use |order=flip	Order
|sing=		Deprecated. Use |adj=	Plurals

Deprecated options

This list: 

Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.

• disp=flip is deprecated. Use order=flip instead
• sing= is deprecated in any situation. Use adj= instead
• Range separator |xx| is deprecated (not compliant). Use |x| instead
• Range separator |*| is deprecated (not compliant). Use |x| instead

TemplateData

Ово је TemplateData за овај шаблон, која се користи у TemplateWizard, Визуелном уређивачу и другим алаткама. Погледајте месечни извештај о употреби парамера за овај шаблон у чланцима заснованим на овом TemplateData.

TemplateData за Convert

Converts measurements to other units.

Параметри шаблона

Овај шаблон преферира форматирање параметара у једном реду.

Параметар		Опис	Врста	Статус
Value	1	The value to convert.	број	обавезно
From unit	2	The unit for the provided value. Предложене вредности km2 m2 cm2 mm2 ha sqmi acre sqyd sqft sqin km m cm mm mi yd ft in kg g mg lb oz m/s km/h mph K °C °F m3 cm3 mm3 L mL cuft cuin U.S.gal U.S.oz psi mpgU.S. $/lb $/kg Пример km	текст	обавезно
To units	3	The units to convert into. Separate units by a space for multiple outputs. In an output unit, use + for a multiplication space. Предложене вредности km2 m2 cm2 mm2 ha sqmi acre sqyd sqft sqin km m cm mm mi yd ft in kg g mg lb oz m/s km/h mph K °C °F m3 cm3 mm3 L mL cuft cuin U.S.gal U.S.oz psi mpgU.S. $/lb $/kg Пример mi nmi	текст	предложено
Precision or suffix	4	Significant digits after decimal dot or, if negative, exponent of ten.	број	необавезно
Link units	lk	Indication of what units to apply wikilinks to. Use “on” for all, “in” for the input unit, “out” for the output units, or “off” for none of the units. Предложене вредности in out on off Подразумевано off Пример on	текст	необавезно
Abbreviation	abbr	Display for the units: “on” to display all units using their unit symbols, “off” to display all units in full words, “in” to display the unit symbol for the input unit, “out” to display the unit symbols for the output units, “unit” to display unit symbols for both input and output units when using scientific notation, “values” for no units at all (neither unit symbols nor full words of units). Предложене вредности in off none on out unit values ~ Подразумевано out Пример on, unit, in, out, off	текст	предложено
Spelling	sp	Spelling of units. Use “us” to display unit names using U.S. spelling. Пример us	текст	необавезно
Adjective	adj	Whether to use adjectival form. Use “on” for singular unit name appended by a hyphen, “mid” to put conversion at end, or “off” (default) for no adjectival form. Предложене вредности mid on pre ri0 ri1 ri2 ri3 off Подразумевано off Пример on	неуређен викитект	необавезно
Conversion	disp	Display conversion result: “or”: after ‘or’, “x”: with custom prefix and suffix, “b”: in parentheses, “table”/“tablecen”, “output only”: alone, “output number only”: alone and without unit, “unit”: not at all but input unit; if the value is a number it is used as precision. Предложене вредности b sqbr br comma or number output number only out output only preunit table tablecen unit unit2 x Пример b	текст	необавезно
Ordering	order	“flip” returns converted value first, input value second. Предложене вредности flip out Пример flip	текст	необавезно
Significant figures	sigfig	Indicates the number of significant figures to be used in rounding.	број	необавезно
Rounding output	round	The type of rounding. “5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range.	број	необавезно
Thousands separator	comma	Sets or suppresses the use of thousands separators in the numbers. “off”: no separator; “gaps”: use space instead of comma as thousands separator; “5”: only add thousands separator when the integral part of the number uses 5 positions or more (10,000 or more; if using comma as thousands separator, 1234 would produce '1234', 12345 would produce '12,345'). Подразумевано on Пример off	условни израз	необавезно
Sort key	sortable	“on” generates a hidden sort key Пример on	условни израз	необавезно
Spell numbers?	spell	If used, spells input or input and output numbers in words, optionally capitalizing the first Предложене вредности in In on On Пример 'in', 'In', 'on', or 'On'	текст	необавезно
Singular?	sing	If 'yes', uses singular form of units (deprecated) Пример yes	условни израз	застарело
Fraction?	frac	fraction as rounding unit	број	необавезно
Currency symbol	$	sets currency symbol in both units Пример $=€ will show " €10 per mile (€6.2/km)"	текст	необавезно
WD property	input	Reads the property value of the item (article), then converts it Пример {{convert|input=P2046}} (P2046=area)	текст	необавезно

See also

• {{Cvt}}
• {{SI units}}
• {{Inflation}}, for converting historical prices to their current equivalent
• {{To USD}}, for currency conversions